Shore hardness testers for hardness determination of plastics through penetration measurement
- Typical application: Measurement of penetration depth (Shore).
- Material thickness of the sample, min. 4 mm
- Particularly recommended for internal comparison measurement. Standard calibrations e. g. to DIN 53505 are not possible because of very narrow standard tolerances
- Can be attached to the test stands TI-AC (for Shore A and Shore A0) and TI-D (for Shore D)
Shore A for rubber, elastomers, neoprene, silicone, vinyl, soft plastics, felt, leather and similar materials
Shore A0 for foams, sponges
Shore D for plastics, synthetic resin, Resopal
®, epoxides, Acrylglas
® etc.
Compact handheld durometer for plastics with drag indicator.
- Max mode: Holds the maximum value in the display
- Point mode: Shows one instant value
- Screws to screw on to the TI: M7 fine thread
- Delivered in a plastic carrying case
| Manufacturer: | Kern & Sohn GmbH |
| Article description 1: | Analogue Shore-Hardness durometer HB0 100-00 |
| Article description 2: | Shore A0, 100HA0, 1,0 HA0 |
