Shore hardness testers for hardness determination of plastics through penetration measurement
- Typical application: Measurement of penetration depth (Shore).
- Material thickness of the sample, min. 4 mm
- Particularly recommended for internal comparison measurement. Standard calibrations e. g. to DIN 53505 are not possible because of very narrow standard tolerances
- Can be attached to the test stands TI-AC (for Shore A and Shore A0) and TI-D (for Shore D)
Shore A for rubber, elastomers, neoprene, silicone, vinyl, soft plastics, felt, leather and similar materials
Shore A0 for foams, sponges
Shore D for plastics, synthetic resin, Resopal
®, epoxides, Acrylglas
® etc.
Compact handheld durometer for plastics with digital display.
- Large display with backlight
- Selectable: AUTO-OFF function or continuous operation, charge indicator
- Delivered in a hard carrying case
| Manufacturer: | Kern & Sohn GmbH |
| Article description 1: | Shore hardness tester HDA 100-1 |
| Article description 2: | Max 100, d= 0.1 Shore A |
